C17510 CuNi1Be CW103C
-
C17510 Beryllium Copper Round Bar (CuNi1Be) | Spot welding electrode arm
C17510 Beryllium Copper offers a high performance material that provides a unique combination of relatively high electrical and thermal conductivity and high stregnth. Class III Beryllium Copper is a heat treatable copper alloy with a high tensile stregnth. C17510 is utilized when a combination of very good mechanical stregnth along with moderate electrical and thermal conductivity is required. The hardness properties of C17510 Beryllium Copper are comparable to tool steel.
-
CuNi1Be – Beryllium nickel copper rod bar c17510 | New energy high current needle
CuNi2Be—C17510 (CDA 1751) Nickel Beryllium Copper is the mirror image of alloys C17500 in terms of its properties & Characteristics. C17510 is also primarily utilized in the industry applications that require most highly thermal or electrical conductivity, which features a Nickel alloying addition (1.40-2.20%). C17510 also offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and RB 100 respectively.
-
CuNi1Be bar rod Beryllium copper uns C17510 | New energy Battery detection probe
C17510 Beryllium Copper Alloy, also known as alloy 3, gets its strength from precipitation heat treating. The grade of the C17510 material has a very high yield-strength-to-conductivity ratio and is good for moderate stress applications where galling is a concern. C17510 is used mainly in aerospace and plastic mold tooling industries, this product is ideal for small electronic connector and mold tooling applications including pylon bushings for large turbine engines, conductors, relay parts, and roll pins.
-
C17510 Class 3 Beryllium Copper Alloys
Class 3 C17510 is specifically recommended for projection welding dies, flash and butt welding dies, current carrying shafts, and bushings. Since they have higher strength than Class 2, C17510 is recommended for highly stressed welder structural current carrying members and heavy duty offset electrode holders.
Class 3 C17510 is generally recommended for spot welding and seam welding steels, such as stainless steel, since it has high electrical resistance. The C17510 Alloy is heat treatable.
The most common uses for C17510 are in those applications that need a lot of conductivity of temperature or electricity. Its ultimate tensile strength is 140 ksi while its hardness is RB 100. The conductivity of C17510 is about 45-60% of regular copper.